Vtech Dect 6.0 Answering Machine User Manual
- Vtech 6.0 Answering Machine Manual
- Amazon Answering Machine
- Vtech Dect 6.0 Answering Machine Instructions
- Answering Machines Walmart
Quick start guide
Shop all cordless phones with a built-in digital answering system here at the VTech Store. Cordless Phones with Digital Answering System. DECT 6.0 digital. Download Telephone User's Manual of Radio Shack KX-TS105 for free. Radio Shack KX-TS105 User's Manual Page 1 VTech DECT 6.0 CS6219 Manual. Accordance with the instructions, may cause harmful interference to.
for models DS6221/DS6221-2/DS6221-3/ DS6221-4/DS6221-5/DS6222-4/DS6222-5
Install the telephone base and charger(s)
Install the telephone base and charger(s) as shown below.
Telephone wall jack
If you have DSL high speed Internet service, a DSL filter (not included) is required.
Electrical outlet not controlled by a wall switch
Telephone line cord
Telephone base
Electrical outlet not controlled by a wall switch
Charger adapter
Charger
•Use only the power adapter(s) and battery(ies) supplied with your VTech telephone.
•For complete feature instructions, please refer to your user’s manual.
Battery installation and charging
Install the battery as shown below. After installing the battery, you might be able to make and receive short calls. For best performance, charge the handset battery for at least 16 hours before use.
1 | 2 |
If the battery | Plug the battery |
compartment cover is on | connector securely |
the handset, press the | into the socket inside |
indentation and slide the | the handset battery |
cover to remove. | compartment, matching |
the color-coded label. |
3 | 4 |
Place the battery with | Align the cover flat |
the label THIS SIDE | against the battery |
UP facing up and the | compartment, then slide |
wires inside the battery | it towards the center of |
compartment. | the handset until it clicks |
into place. |
Vtech 6.0 Answering Machine Manual
5
Charge the handset by placing it in the telephone
base or charger. The
CHARGE light is on when CHARGE light the handset charges.
Make, answer and end a call Make a call
1.Press or . You hear a dial tone.
2.Dial the number.
Predial a call
1.Dial the number.
2.Press or .
Amazon Answering Machine
Answer a call
Press , or any of the dialing keys (0-9, #, *).
End a call
Press OFF/CLEAR or put the handset in the telephone base or charger.
Turn the answering system on or off
The answering system must be turned on to answer and record messages.
When the answering system is turned on, the ANS ON/OFF light on the telephone base will be on and ANS ON will display on the handset.
To turn on or off with the telephone base:
•Press ANS ON/OFF to turn the answering system on or off. If the answering system is turned on, it announces,
“Calls will be answered.” If the answering system is turned off, it announces,
“Calls will not be answered.”
To turn on or off with a handset:
1.Press MENU/SELECT to show the menu when the handset is not in use.
2.Press MENU/SELECT to select
>ANS. SYSTEM.
3.Press or to select >ANS SYS SETUP, then press MENU/SELECT.
4.Press MENU/SELECT to select
>ANSWER ON/OFF.
5.Press or to choose ON or OFF, then press MENU/SELECT.
Outgoing announcement
The telephone is preset with a greeting that answers calls with “Hello, please leave a message after the tone.” You can use this preset announcement, or replace it with your own.
Use a handset to record your own announcement:
1.Press MENU/SELECT to show the menu when the handset is not in use.
2.Press MENU/SELECT to select
>ANS. SYSTEM.
3.Press or to select >ANS SYS SETUP, then press MENU/SELECT.
4.Press or to select >ANNOUNCEMENT, then press MENU/SELECT.
5.The handset announces, “To play, press 2. To record, press 7.” Press 7 to record.
6.The handset announces, “Record after the tone. Press 5 when you are done.”
7.After the tone, speak towards the microphone of the handset.
8.Press 5 when finished.
9.The answering system automatically plays back the newly recorded announcement. Press 5 to stop the playback at anytime; 2 to replay the recorded announcement; or 7 to record again if desired; or 3 to delete your own recorded announcement.
To play messages with the telephone base:
Press /PLAY/STOP to play messages and stop playback.
Options during playback:
•Press VOL to adjust the speaker volume.
•Press /SKIP to skip to the next message.
•Press /REPEAT to repeat the message currently playing. Press /REPEAT twice to listen to the previous message.
Vtech Dect 6.0 Answering Machine Instructions
•Press X/DELETE to delete the current message.
To play messages with a handset:
1.Press MENU/SELECT to show the menu when the handset is not in use.
2.Press MENU/SELECT to select
>ANS. SYSTEM.
3.Press MENU/SELECT to select
>PLAY MSGS.
Answering Machines Walmart
Options during playback:
•Press VOL to adjust the speaker volume.
•Press 6 to skip to the next message.
•Press 4 to repeat the message currently playing. Press 4 twice to listen to the previous message.
•Press 3 to delete the current message.
•Press 5 to stop.
IMPORTANT!
If your product is not working properly:
•Refer to the Troubleshooting section of the user’s manual.
•Visit our website at www.vtechphones.com or call 1 (800) 595-9511.
In Canada, go to www.vtechcanada.com or dial 1 (800) 267-7377.